The multifunction AP-175 is an affordable, fully hardened outdoor 802.11n access point (AP) that provides maximum deployment flexibility in high-density campuses, storage yards, warehouses, container/transportation facilities,
extreme industrial production areas and other harsh environments. The high-performance AP-175 delivers wire-like performance at data rates up to 300 Mbps per radio.
The AP-175 features two 2x2 MIMO dual-band 2.4-GHz/5-GHz radios with quad antenna interfaces. Each radio is capable of providing a maximum aggregate transmit power of up to 25dBm.
With wall and mast mounting options, the AP-175 is built to provide years of trouble-free operation.
Engineered to survive in harsh outdoor environments, the AP-175 withstands exposure to high and low temperatures,
persistent moisture and precipitation, and is fully sealed for protection from airborne contaminants. All electrical interfaces include industrial-strength surge protection.
As an 802.11n AP, the AP-175 works with Aruba’s centralized Mobility Controllers to enable the use of wireless as a primary connection with speed and reliability comparable to a wired LAN. It also increases performance by utilizing techniques such as channel bonding, block acknowledgement and MIMO radios. Advanced antenna technology also increases range and reliability.
The key to ensuring wire-like performance and reliability is Aruba’s unique Adaptive Radio Management (ARM) and spectrum analysis* capabilities, which manage the 2.4-GHz and 5-GHz radio bands to mitigate RF interference and maximize Wi-Fi client performance.
The multifunction AP-175 can be configured through the Aruba Mobility Controller to provide wireless LAN access with part-
time air monitoring, dedicated air monitoring for wireless IPS and spectrum analysis, Remote AP (RAP) functionality or secure enterprise mesh.
The AP-175 can operate either from standard 802.3at power-over-Ethernet (PoE+) sources (AP-175P model), a 100-240 volt AC power source (AP-175AC model), or a 12-48 volt DC power supply or solar and plant bus power sources. The AC and DC powered models provide an 802.3af POE power source (PSE) on the Ethernet interface.
WIRELESS RADIO SPECIFICATIONS
• AP type: Dual-radio, dual-band 802.11n outdoor
• Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835 GHz
- 5.150 to 5.250 GHz
- 5.250 to 5.350 GHz
- 5.470 to 5.725 GHz
- 5.725 to 5.850 GHz
• Available channels: Controller-managed, dependent upon configured
regulatory domain
• Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)
- 802.11n: 2x2 MIMO with two spatial streams
• Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Transmit power: Configurable in increments of 0.5 dBm
• Maximum transmit power:
- 2.4 GHz: 25 dBm (limited by local regulatory requirements)
- 5 GHz: 25 dBm (limited by local regulatory requirements)
• Maximum ratio combining (MRC) for improved receiver performance
• Association rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: MCS0 - MCS15 (6.5 Mbps to 300 Mbps)
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11n packet aggregation: A-MPDU, A-MSDU
Downliad AP-175 Outdoor.pdf
Downliad filename
[ add comment ] | permalink | print article | related link |
( 3 / 118 )
Random Entry