The multifunctional enterprise-class AP-93H 802.11n access point
(AP) easily mounts to an Ethernet wall plate and uses the existing
structured cabling system to provide secure wired and Wi-Fi
network access in dormitories, classrooms, hotels, medical clinics
and multitenant environments.
Capable of delivering high-performance Wi-Fi services to multiple
rooms, the AP-93H greatly simplifies RF coverage planning and
significantly reduces wireless LAN (WLAN) deployment costs. The
AP-93H is built to provide years of trouble-free operation and is
backed by a limited lifetime warranty.
Delivering wire-like performance at data rates up to 300 Mbps, the
AP-93H features a single 2×2 MIMO 2.4-GHz or 5-GHz dual-band
radio with internal antennas. For wired connectivity, it features four
10/100BASE-T switch ports, an additional pass-through RJ-45
port and a 10/100/1000BASE-T uplink port that can operate from
an 802.3af power-over-Ethernet (PoE) source or a 12-volt DC
power supply.
OPERATING MODES
• 802.11a/b/g/n AP
• Remote AP (RAP)
• Air Monitor (AM)
• Spectrum monitor
• Secure enterprise mesh
RADIOS
• Software-configurable single radio capable of supporting 2.4
GHz or 5 GHz
• 802.11n capable, implementing 2x2 MIMO with 2 spatial
streams, providing up to 300 Mbps data rate
WI-FI CLIENT OPTIMIZATION
• ClientMatch™ technology eliminates sticky clients by
continuously gathering session performance metrics and utilizing
this data to steer mobile devices to the best AP and radio, even
while users roam.
RF MANAGEMENT
• Automatic transmit power and channel management control
with automatic coverage-hole correction via Adaptive Radio
Management (ARM)
• Spectrum analysis remotely scans the 2.4-GHz and 5-GHz
radio bands to identify sources of RF interference. This provides
visibility into non-802.11 RF interference sources and their effect
on 802.11 channel quality.
Downliad DS_AP93H.pdf
[ add comment ] | permalink | print article | related link |
( 3 / 273 )
Random Entry